Button Pull Tester (HTP-005):
Button Pull Test Machine/Button Snap Tester/Button Pull Tester/Button Tester
To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments to ensure button and firmware can be fixed on the ready-made garments properly, avoiding button drop from garment to brought danger to baby's swallow.
Therefore, button, snap fasteners and firmware from all kinds of garment have to be used Button Pull Test Machine to test. It also can be used to measure adhesion strength of apparel, toys, footwear etc attached with accessory, estimate mechanical damage of sharp edge.
Dimension: 280 x 230 x 735 mm (L× W× H)
Weight: 25 kg
Standard: 16 CFR 1500.51-53, ASTM WK4510 PS79-96, ASTM F963, EN71-Part1, M&S P115A
Pull testerImada Force Gauge FB 300N depends on order item5PCS fixture: Universal mother button fixture, male button fixture, long mouth clamp, three Claw Clamp, two Claw Clamp
1. Install fixture, coordinate the button to test, fix the sample on the base.
2. Release the fxiture, grasp button firmly and pull upward, each button can endure at least 17 pounds pull force(7.72kg), maintain 10 sec. No loose or damage. Test at least 20 buttons in each item. The breaking strength can be recorded.
3. If one of button loose or damage, replace it and all of them have to be test once again.
Main instrument is made from cast iron structure, handle wheel can adjust force gauge position, aluminum holder can firmly fix the test sample.