Guangdong, China
Business Type:
Manufacturer/Factory & Trading Company
Number of Employees:
25
Year of Establishment:
2010-04-30
Management System Certification:
ISO 9001, ISO 9000
Average Lead Time:
Peak season lead time: 1-3 months
Off season lead time: one month
OEM/ODM Service
Sample Available

Chairs Leg Front and Side Strength Test Machine, Chairs Leg Front Strength Test Machine, Chairs Leg Side Strength Test Machine manufacturer / supplier in China, offering BIFMA X5.1 Chairs Leg Front and Side Strength Lab Test Machine, Dura Wash Print Durability Tester, Dura Wash Print Durability Test Machine and so on.

Gold Member Since 2011
Audited Supplier

BIFMA X5.1 Chairs Leg Front and Side Strength Lab Test Machine

Get Latest Price
Min. Order: 1 Piece
Port: Shenzhen, China
Production Capacity: 100PCS/Year
Payment Terms: L/C, T/T, D/P
Type: Chair Testing Machine
Capacity: 2000n
Max Stroke: 700mm
Accuracy of Force to Display: 0.1 Units
Accuracy of Force: Indicating Value +/-0.05%
Accuracy of Shift: 0.01mm

You Might Also Like

Loading...

Basic Info

Model NO.: TNJ-003
Trademark: TONY
Transport Package: Wooden Box
Specification: ANSI BIFMA X5.1
Origin: Dongguan
HS Code: 9031809090

Product Description

Bifma X5.1 Chairs Leg Front and Side Strength lab Test machine
TNJ-003 Chair Legs Pressure-resistant Tester--Base Test-StaticI
BIFMA X5.1 Chairs Leg Front and Side Strength Lab Test Machine

Technical Parameter Bifma X5.1 Chairs Leg Front and Side Strength lab Test machine:
Specifications:
Capacity: 2000N
Max stroke:700mm.
Accuracy of force to display:0.1 units
Accuracy of force:indicating value ±0.05%.
Accuracy of shift:0.01mm
Accuracy of force to display:indicating value ±0.01%
Special fixture uses to fix five claws.
This machine is equipped with lenovo computers and HP printer.
Standard:
ANSI BIFMA X5.1 Leg strength Test - Front and Side

Relevant Test method as below:
Leg Strength Test - Front and Side Application (See Figure 18a & 18b)
                                               

 
BIFMA X5.1 Chairs Leg Front and Side Strength Lab Test Machine
                                   Figure 18a - Leg Strength Test - Front Application



BIFMA X5.1 Chairs Leg Front and Side Strength Lab Test Machine
 c
Applicability 
This test applies to all chairs without pedestal bases. 
 
Purpose of Test 
The purpose of this test is to evaluate the ability of legs to withstand horizontal side and frontal forces. 
18.3 Front Load Test 
18.3.1 Test Setup 
The chair shall be placed on a test platform, with the back legs restrained by a block 11 to 38 mm (.44 to 1.50 in.) high. Figure 18a shows one acceptable method of restraining the chair.
 
If adjustable features are available, all adjustments shall be set at normal use conditions. 
The loading device shall be attached to the chair so that an initially horizontal force is applied inward and parallel to the front-to-rear axis of the chair, between 13 mm (0.5 in.) and 38 mm (1.5 in.) from the bottom of a leg as shown in Figure 18a. For chairs with casters, apply the load to the chair leg, but not more than 13 mm (0.5 in.) from the point of caster attachment (bottom of the leg). The load shall be applied to the apparent weakest point of the leg. Where the apparent weakest point is the left or right edge of the leg, apply the load so that it is no greater than 25 mm (1.0 in.) from the edge.
 
18.3.2 Test Procedures
 Functional Load Test 
A force of 334 N (75 lbf.) shall be applied once to each front leg individually for one minute. 
Remove the force. 
Proof Load Test 
A force of 503 N (113 lbf.) shall be applied once to each front leg individually for one minute. 
Remove the force. 

ANSI/BIFMA X5.1-2011 
Side Load Test 
Note: A separate chair may be used for the side load portion of the test. 

18.4.1 Test Setup 
The chair shall be placed on a test platform with the side leg(s) restrained by a block 11 to 38 mm (.44 to 1.50 in.) high. Figure 18b shows one acceptable method of restraining the chair.
 
If adjustable features are available, all adjustments shall be set at normal use conditions. 
The loading device shall be attached to the chair so that an initially horizontal force is applied inward and parallel to the side-to-side axis of the chair, between 13 mm (0.5 in.) and 38 mm (1.5 in.) from the bottom of a leg as shown in Figure 18b. For chairs with casters, apply the load to the chair leg, but not more than 13 mm (0.5 in.) from the point of caster attachment (bottom of the leg). The load shall be applied to the apparent weakest point (front-to-back) of the leg. Where the apparent weakest point is the front or rear edge of the leg, apply the load so that it is no greater than 25 mm (1.0 in.) from the edge.
 
18.4.2 Test Procedure 
 Functional Load Test 
A force of 334 N (75 lbf.) shall be applied once to a front and rear leg individually for one (1) minute.
Remove the force. 
Proof Load Test 
A force of 503 N (113 lbf.) shall be applied once to a front and rear leg individually for one (1) minute. 
Remove the force.

Send your message to this supplier

*From:
*To:
avatar Mr. 0liver Wu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now